4-Bit Counter Module
Modules are useful boards that handle commonly used circuits that can be a pain to design from scratch. In this kit, you will build the 4-Bit Counter Module which is a 4-bit counter-based around the 4516 and has a decimal display as well as a 4-Way DIP switch for presetting the onboard counter. The module has all inputs and outputs from the 4516 connected to pads which can be soldered to and then connected to other projects.
Instructions / Documentation
Product specifics
- Component Count: 24
- Battery Powered?: No
- Operating Voltage: 3V to 16V
- Operating Frequency: N/A
- Output Voltage: 0V to VIN
- Output Current: N/A
- Dimensions (PCB): 63mm x 45mm
- Mounting Holes: Yes
- Prebuilt: No – Kit form
- Batteries Not Included
Included in this kit
- 2 x 16 DIP Socket
- 1 x 4516
- 1 x 4511
- 7 x 680R Resistors
- 8 x 10K Resistors
- 2 x 100nF Capacitors
- 1 x 1N5817
- 1 x 4 Way DIP Switch
- 1 x PCB
Applications
The 4-Bit Counter Module is an ideal kit for those who want to include a simple 0-9 counter display in their project. The PCB has all control signals connected to pads including counting up / down, input, output, and clock which gives the user full capabilities of the 4516. Examples of projects that can benefit from this module would include clocks, people counters, signal counting, and simple computers. The on-board DIP switch provides the ability to have a preset load value that is loaded upon a positive edge on the load input. This kit is also ideal for use in the classroom as it can be built in under an hour, uses a high-quality PCB, is entertaining, and can be used in conjunction with a breadboard for testing. If an educational project is required then the Reaction Tester is a kit that includes two 7 segment displays that can time a users reaction.
Notes
Note that product specifics such as output frequency depend on the tolerance of the components. The numbers provided here are an approximation only. Also take note that the estimated delivery is not guaranteed (unless special delivery is chosen) and free delivery has a maximum waiting time of two weeks. Any product that is returned which is built using lead solder is ineligible for a refund.
All parts sold by MitchElectronics are compliant with RoHS and REACH directives which ensure that they can be used in commercial environments as well as complying with environmental laws. Watch the video below to learn more about RoHS compliance and why it may be important for your next DIY project!
Reviews
There are no reviews yet.